📞+86 159 5113 7160
✉info@jblmetal.com
Language
Systems · SYS-05

Art Mesh &
Bespoke Objects

No standard specifications. Every geometry, material, and surface is defined from the project brief, artist intent, and structural requirement. Starting point is always the drawing or brief.

BespokeLandmarkSculpturalArt InstallationCustom
Submit Drawings → Request Sample
SYS-05 · Technical Reference
SpecificationFully custom — no std
Starting PointProject brief or drawing
MaterialsAll available grades
FormAny geometry
SamplingMandatory — always
Lead TimeConfirmed per project
Art Mesh & Bespoke Objects · Hero image · Full system installed
System Definition

What this system
is — and isn't.

There are no standard specifications for this system
Art mesh and bespoke object commissions begin with a project brief, architectural drawing, or design intent document. Specifications are developed from that starting point — material, form, surface, and structural interface are all defined for the project.
Sampling is mandatory — without exception
Because bespoke objects cannot be validated against a standard, a physical sample or prototype is produced before any production quantity is committed. The sample is the binding reference.
Structural and installation interfaces are part of the design
How the object is fixed, suspended, or integrated into the building structure is part of the design process — not an afterthought. Structural interface is confirmed from drawings before fabrication begins.
Engineering Note

All specifications for this system are defined from the project drawing or brief. A drawing review is conducted before any quote is issued. Specification conflicts are flagged in writing — not resolved by assumption.

Submit Drawings for Review →
This system is not
Not produced from verbal briefs — a drawing, sketch, or written brief is required to begin
Not available with standard lead times — every project is individually scheduled
Not priced before the brief is reviewed — complexity must be assessed before any commercial response
Applications

Where this system
is specified.

Application environments drive specification decisions. Each context has different structural requirements, finish requirements, and installation constraints.

Landmark Installations · Application image
Landmark Installations
Large-scale public art and architectural feature installations. Structural interface, material, and installation sequence confirmed from engineering drawings.
Bespoke Architectural Features · Application image
Bespoke Architectural Features
Custom metal mesh elements integrated into building architecture — lobbies, atriums, facades, and signature spaces.
Sculptural & Art Objects · Application image
Sculptural & Art Objects
Artist and designer commissions in metal mesh. Material selection and fabrication method developed from the artistic intent and structural requirement.
Engineering Specifications

Technical reference
parameters.

These ranges represent the achievable specification envelope for this system. Project specifications are defined from drawings — not selected from these tables.

ParameterLight / FineStandardHeavy / Large
ParameterBespoke CommissionArchitectural FeatureArt Installation
Starting PointArtist briefArchitectural drawingDesign intent doc
MaterialProject-definedProject-definedProject-defined
SamplingMandatoryMandatoryMandatory
Structural reviewRequiredRequiredCase by case
All specifications shown are indicative ranges. Every project specification is defined from submitted drawings and confirmed in writing before production begins.
Material Selection

Material is selected
by environment — not
by preference.

Material grade, wire composition, and surface finish are determined by the operating environment, installation exposure, and design life requirement of the project.

Any grade
Stainless Steel
Dominant material for structural and exterior bespoke work. Grade selected by environment and structural requirement.
Any finish
Custom PVD
Patination
Project-defined
Aluminium
Lightweight bespoke structures where self-weight is critical. Anodised in any RAL-equivalent colour.
Anodised
Powder coat
Custom
Project-defined
Brass / Bronze
Warm-tone artistic commissions. Natural patina development or lacquered to stabilise finish.
Natural
Patinated
Lacquered
Project-defined
Mixed Materials
Combination of metal grades, glass, stone, or other materials. Integration confirmed in structural drawings.
Project-defined
Sampling & Quality Evidence

What the physical
record looks like.

Physical samples and QA records are produced for every project. The sample is the binding production reference — not the drawing.

Bespoke installation · Landmark project · Custom geometry · SS316
Bespoke installation
Detail · Custom weave pattern · First article
Detail
Prototype · 3D form mock-up before production
Prototype
Sampling · Scale model against project drawing
Sampling
QA · Geometry verification against specification
QA
Every SYS-05 project follows the same 7-stage execution process — from drawing review to after-sales.
View How We Execute →
All Systems
SYS-01
Woven Mesh
SYS-02
Rigid Panels
SYS-03
Flexible Fabrics
SYS-04
Coil & Spiral
SYS-05
Art Mesh
Submit Drawings for Technical Review

Ready to specify
Art Mesh & Bespoke Objects?

Submit your project drawings or brief. We conduct a full drawing review and respond with a written system recommendation, specification parameters, and execution plan — within one working day.

Submit Drawings → Request a Sample